BL SWIPER® Red Large

BL SWIPER® RED LARGE is recommended for pipe sizes from 300 mm up to 1200 mm (12”-48”), depending on available pump capacity. The BL SWIPER® RED LARGE is designed to work with recycling water as well as clean water.

Due to the extreme power of the BL SWIPER® series of nozzles, the exchangeable jets need to be adapted to working task. Depending on working task there are two different jet setups:

The standard set up of BL Swiper® is used where the water level in pipe is low, meaning there is no water in pipe or just a low level (max 50 % water coverage of the nozzle).

The standard set up is also used when it is a need to reduce risk of blowing toilets. Service lines from housing with sensitiveness to rapid air currents always need to be considered. By the proper operating technique this can easily be avoided with the BL SWIPER® series of nozzles, without affecting the cleaning power in main line. We are happy to assist with operating instructions.

If you want optimal cleaning efficiency in pipe with low water level and clean the pipe as quick as possible with minimal total water and diesel consumption, use a maximum pressure, pulling back the nozzle, of 60 bar (900 PSI). Note that BL SWIPER® works effective already at 30 bar (450 PSI) pressure at nozzle.